Decor Ideas

How To Hang A Picture On A Brick Wall

How To Hang A Picture On A Brick Wall. Any area can benefit from having brick walls since they have a modern feel and have an interesting, urban vibe. However, brick walls are a real headache to work with when it comes to any type of design or restoration. From light fixtures to hanging pictures on a brick wall is all about dealing with challenges. Although it may seem easy, attaching a nail to a wall is more complicated than that, as you can trust.

Also read: Red Leaf Plant For Beautiful Home Decoration

we’ve put together a step-by-step guide for you, to make it simple for you to hang a picture effectively on a brick wall.

Before hanging any object on a brick wall make sure to collect needed items. Here is the list of essentials that you definitely need while hanging a picture on a brick wall.

  • Cordless drill
  • Hammer
  • Tape measuring
  • Screws,
  • Anchors,
  • Level
  • Pointer
  • A masonry drill bit sized for your screws

Mark the location for photo

Before hanging your artwork, it’s crucial to determine where on the wall it will go and how many hanger holes it will require. It has a wire across it, is it a big piece? One hole will do the work in that situation. The number of holes required will depend on how many D-rings or sawtooth hangers are present.

Use a pointer to mark the locations of the holes where your frames will adhere to the wall once you’ve determined how many you need. Ensure your mark is in the middle and that the height or lowness at which you want the picture to hang is taken into consideration.

Depending on the size and weight, hang different things in different ways. Drilling one hole should be sufficient if the object is a little image on a string. Two screws are required to maintain balance and appropriate support for larger images, art mirrors with a cable, or D-Rings, according to Russo.

Using a level to ensure that any holes you create are even is also a good idea.

Tip: Keep in mind that there are different kinds of anchors: brass and drywall. While drywall anchors may only be used on cavity walls, brass works best for brick.

Drill the marked location

Next, take a masonry bit and your drill. A masonry bit is made specifically for brick, stone, and concrete. Insert the bit into the drill. Drill gently so as not to overheat your drill and make sure the hole is deep enough to handle the length of the screw you’re using. Take breaks as necessary. Perform this action in each of the highlighted areas. After drilling the holes, use a dry towel to wipe away the remains.

Hammer your anchors in

Use your hammer to tap the anchors into the holes that you have just created. The anchors will keep your screws in your wall and provide extra security for your hanging. 

Screws should be drilled into the anchor

Drill the screws into the anchor next, leaving enough screw space away from the wall for the cable to hang on or to connect the screw eyes to. According to experts, 1/8 to 14 inches of additional space is typically sufficient to hang your artwork.

Check the level of hanging picture

After tightening the screws, hang the photo. Once it’s up, check to see if it’s level. Particularly important for objects hanging from a single wire.

If the entire procedure of hanging seems overwhelming, or if you are unable or unable to drill holes in the brick walls of your room, you might want to utilise brick clamps. These hooks easily and cheaply grasp onto your brick without the use of any equipment. Before you buy, be sure to measure your brick because they come in a variety of sizes.

Note: This post is prepared for all those who don’t know how to hang a picture on a brick wall in a good way.

Kindly do share your feedback with us if you found this info practical. Good luck

Must read: How To Hang Curtains Without A Rod

Sunbal Razzaq

Sunbal Razzaq is the founder & CEO of Sunshine Tips.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button